Tactical Shit Shop

Skip to Main Content »

You're currently on:



Availability: Only 2 left in stock


Quick Overview

Weapon Sight Augmentation Material

For when you hear that "Bump in the night" and need to see where your aiming.

Do it yourself night sights!  


Weapon Sight Augmentation Material or WeapSAM is made to enhance firearm iron sights, for visibility in poor light.

Many firearms do not come with commercial available tritium sights. WeapSAM is a photo phosphorescent binary polymer non-elastomer that can be installed into any firearm. It glows at a peak illumination of 37 nano lumens, and can hold its charge for a few hours. The longer it glows the dimmer it will eventually get, but a pulse of light from a flashlight can bring it back to full charge. It is not a paint therefore it is not susceptible to any kind of common firearms solvent. Once installed in a recessed or drilled out sight, it's there forever. It will work as long as you charge the plastic. It may yellow to a small percentage in about 20 years, and as long as you do not heat the gun over 800 degrees it will continue to be able to glow indefinitely ( the plastic suspension matrix can only handle 200 degrees).

I made the stuff for the bump in the night type situation, where you reach for your gun, and need to clear your house. A situation that you actually have a little bit of time, maybe a second or two to charge the plastic. It is often asked if this material is radioactive. No, it is not radioactive, it's about as radioactive as beach sand, or squirrel shit. It is a very special proprietary crystalline structure that absorb UV light, and emits it back very slowly, and in a wavelength that is perceptible to human vision.

In other words "It allows you to see your sights in the dark"

Customer Reviews

3 Item(s)

per page
Works as advertised, but here is a warning before you use.
Review by Erik
The product does work and glows quite brightly with a flashlight charge. What is not specified is that it dried almost clear and if you grind off your white dots on your existing sight than you will be left with just the black blade sights during the day. That being said, I drilled a little detent on the front post of a set of flip up AR sights, and when you walk into a dark room from outside it glows nicely. Does not seem to charge much at all from household lights. (Posted on 4/13/15)
Review by MIO
I can't afford night sights on all my weapons so
I bought this and with minor prep work in 10 minutes I have night sights. I didn't place them for precision but rather durability and getting it on a mans chest at reasonable distances appropriate for bump in the night. An example is I drilled just below the front sight on the A frame on my AR rather than the sight post. The glow dot at the bottom of my circle rear sight mean everything is aligned.
They charge with a simple hit of light and hold charge for a while after dark if the weapon is left in regular light. Drill a dimple so it will have material to stick and wolla. There is enough in these bottles to do all my guns and of course it's made in Oklahoma. It's too easy and too cheap not to have this enhancement. (Posted on 3/21/15)
Great stuff!!
Review by Mark
This is some great stuff. Very easy to apply and durable. I recommend it for anyone looking for an inexpensive night sight augmentation. (Posted on 2/8/15)

3 Item(s)

per page

Write Your Own Review

Only registered users can write reviews. Please, log in or register