Armageddon Gear Revolution Trigger

One of the common trigger control issues that causes inconsistencies for the precision shooter is lateral force applied to the trigger upon release. Instead of the straight-back, linear release that would be optimal, this lateral force results in a certain degree of horizontal dispersion or the "pulled shots." So, when our friend Tom Fuller from Armageddon Gear approached us with his "roller trigger" idea, we saw the merit immediately and knew we needed to incorporate it into our AR fire control system." says JP Enterprises. Attached to a modified version of their own trigger design with its improved sear geometry, the free-spinning roller of the Revolution Trigger auto-corrects for innate trigger control error by allowing your trigger finger to roll to a neutral position. Once you try it, you'll see exactly what they mean and why this is the future of trigger control.

Spring Selection Guide:

• Competition/Recreation
  The yellow/yellow combination may be used for competition and various recreational applications with hand loads or domestic-manufactured, non-military ammunition. It will result in a release weight in the 3.0-3.5 lb. range on most receivers.
• Enhanced Ignition Reliability 
  The yellow trigger spring combined with the red hammer spring will yield a release weight of 3.5-4.0 lbs. on most receivers and offers increased reliability for (5.56 NATO) or foreign-manufactured ammo with low sensitivity primers. The yellow-red springs must be used for any large-frame AR installation to ensure 100% ignition reliability. This is also the minimum acceptable combination for tactical duty (LE) installations and should be used only with domestic-manufactured ammo in this application.
• Duty/Defense
  The tactical spring set includes a full powers (grey) hammer spring (purchased separately) and yellow trigger spring. It may be required for agencies that mandate a trigger release weight of over 4 lbs. This set up also insures 100% ignition reliability on both AR-15 and AR-10 type rifles.
• CMP
  To meet NRA Service Rifle Competition rules of a 4.5 lb. release weight, the CMP spring set (purchased separately) includes the full-power hammer spring and a custom trigger return spring, which will allow you to tune to a release weight just over 4.5 pounds to lift the NRA weights.